Perrys Automotive INC
Redding, CA
Station Overview
Vehicle Types
About Perrys Automotive INC
Perrys Automotive INC is a BAR-licensed Vehicle Safety Systems Inspection (VSSI) station located in Redding, California. Certified technicians at this station are authorized by the California Bureau of Automotive Repair (BAR) to perform VSSI inspections on salvage-titled vehicles — a required step before a repaired salvage vehicle can be legally registered and driven in California.
This station accepts Cars, Trucks/SUVs for VSSI inspections. Call ahead to confirm availability and schedule your appointment — inspections typically take 2–3 hours.
The VSSI Process — What to Expect
Before your appointment at Perrys Automotive INC
Complete All Repairs First
All damage must be fully repaired before the inspection. Resolve any open safety recalls at NHTSA.gov — the BAR-SIS system checks automatically.
Arrive with Your Documents
Bring vehicle registration and repair receipts. The technician scans your VIN and enters your vehicle into the BAR Safety Inspection System.
The Inspection (2–3 Hours)
A certified technician inspects all 7 safety systems using specialized equipment, certified under penalty of perjury.
Receive Your Vehicle Safety Report
You'll get a printed VSR. If you pass, the Certificate of Compliance is sent electronically to the DMV. If you fail, the VSR tells you exactly what to fix.
Register with the DMV & Drive!
After passing, visit the DMV to complete registration. A Smog Check may also be required for 1976+ vehicles. No future VSSI needed for renewals.
All 7 Safety Systems Inspected
Every VSSI inspection covers these 7 systems with 50+ individual checkpoints:
Lighting
Headlights, brake lights, turn signals, reverse lights, hazard lights, license plate light, reflectors
Passenger Compartment
Seatbelts, airbags, mirrors, windshield, wipers, horn, dashboard warning lights
Tires & Wheels
Tread depth (min 2/32"), inflation, condition, lug nuts — no temporary spare tires
Brakes
Pads, rotors, calipers, brake fluid, brake lines, parking brake, ABS warning light
Steering & Suspension
Steering column, tie rods, ball joints, struts, shocks, springs, CV joints, wheel bearings
Body Structure
Frame/unibody, doors, hood, bumpers, fuel system, exhaust, VIN plate integrity
Road Test
Brake performance at 30+ mph, steering response, transmission, warning lights, overall control
Top Reasons Vehicles Fail
Prepare before your appointment
Open Safety Recalls
The #1 reason for failure. BAR-SIS automatically checks your VIN. Check NHTSA.gov and resolve all recalls before arriving — manufacturers fix them free.
Airbag System Issues
Missing airbags, non-OEM replacements, or an airbag warning light on will result in an automatic fail.
Temporary Spare Tire
A 'donut' spare is an automatic fail. All four wheels must have full-size tires with adequate tread (min 2/32").
Lighting Failures
Even a single burned-out bulb can fail the inspection. Check all lights before your appointment.
Seatbelt Problems
All seatbelts must retract smoothly, latch securely, and show no cuts or fraying. Test every seatbelt.